Specifications :
HARDWARE FEATURES
Processor | Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc |
Memory | 64MB DDR2 RAM, 8MB Flash |
Interface | 1 10/100Mbps Shielded Ethernet Port |
1 10/100Mbps Shielded Ethernet Port (LAN1) | |
2 RP-SMA | |
1 Grounding Terminal | |
1 Reset Button | |
Power Supply | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) |
Voltage range: 16-27VDC | |
Dimensions ( W x D x H ) | 198×75×40 mm |
Protection | 15KV ESD Protection |
6KV Lightning Protection | |
Enclosure | Outdoor ASA stabilized plastic material |
IP65 water and dust proof Certification |
WIRELESS FEATURES
Wireless Standards | IEEE 802.11a/n |
Proprietary Protocol | TDMA Mode (with Pharos MAXtream enabled) |
Wireless Speeds | Up to 300Mbps (40MHz,Dynamic) |
Up to 144.4Mbps (20MHz,Dynamic) | |
Up to 72.2Mbps (10MHz,Dynamic) | |
Up to 36.1Mbps (5MHz,Dynamic) | |
Frequency | 5.15~5.85GHz |
Note: Available operation frequency may vary depending on the limitaion of the countries or regions in which the device is used. | |
Transmission Power | 27dBm/500mW (Adjustable power by 1dBm) |
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
Operating Modes | AP / Client / Bridge /Repeater |
AP Router Mode / AP Client Router(WISP Client) Mode | |
Network Configuration | WAN: Static/Dynamic/PPPoE/L2TP/PPTP |
LAN: Static/Dynamic/Dynamic/DHCP | |
Forwarding: DMZ/ALG/UPnP/Virtual Server/Port Trigger | |
Security: SPI Firewall/Ping Forbidden/VPN/DOS Protection | |
Access Control | |
Static Routing | |
Bandwidth Control | |
IP & MAC Binding | |
Wireless Configurations | Pharos MAXtream TDMA Technology |
802.11a/n Modes | |
Selectable Channel Width: 5/10/20/40MHz | |
Automatic Channel Selection | |
Transmission Power Control | |
Dynamic Frequency Selection (DFS) | |
WDS Enable/Disable | |
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption | |
SSID Broadcast Enable/Disable | |
Multi-SSID with VLAN Tagging (AP mode only) | |
Distance/ACK Timeout Setting | |
Wireless MAC Address Filter | |
Wireless Advanced: | |
> Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia | |
Management | Discovery and Remote Management via Pharos Control application |
HTTP/HTTPS Web-based management | |
System Log | |
SNMP Agent(v2c) | |
Ping Watch Dog | |
Dynamic DDNS | |
SSH Server | |
System Tools | Wireless Signal Quality Indicators: |
Signal Strength/Noise/Transmit CCQ/CPU/Memory | |
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP | |
Spectrum Analyzer | |
Speed Test | |
Ping | |
Traceroute | |
System-level Optimizations | 802.11a/n Tx beamforming technology |
Optimized IGMP Snooping/Proxy for multicast applications | |
Hardware watch dog |
OTHERS
Certification | CE, FCC, RoHS, IP65 |
Package Contents | Outdoor Wireless Base Station |
24V 1A Passive PoE Adapter | |
Pole Mounting Kit | |
AC Power Cord | |
Quick Installation Guide | |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. |
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. | |
Environment | Operating Temperature: -30°C~70°C (-22℉~158℉) |
Storage Temperature: -40℃~70℃ (-40℉~158℉) | |
Operating Humidity: 10%~90% non-condensing | |
Storage Humidity: 5%~95% non-condensing |