Specifications :
HARDWARE FEATURES
Processor | Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
Memory | 64MB DDR2 RAM, 8MB Flash |
Interface | 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in) |
1 Grounding Terminal | |
1 Reset Button | |
Power Supply | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) |
Voltage range: 16-27VDC | |
Power Consumption | 10.5 Watts Max |
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. | |
Dimensions ( W x D x H ) | 224 x 79 x 60 mm |
Antenna Type | Built-in 9dBi 2×2 Dual-polarized Directional Antenna |
Beam Width: 65° (H-Plane) / 35° (E-Plane) | |
Note: For more details, please refer to datasheet | |
Protection | 15KV ESD Protection |
6KV Lightning Protection | |
Enclosure | Outdoor ASA stabilized plastic material |
IPX5 waterproof Certification |
WIRELESS FEATURES
Wireless Standards | IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
Proprietary Protocol | TDMA Mode (with Pharos MAXtream enabled) |
Wireless Speeds | Up to 300Mbps (40MHz,Dynamic) |
Up to 144.4Mbps (20MHz,Dynamic) | |
Up to 72.2Mbps (10MHz,Dynamic) | |
Up to 36.1Mbps (5MHz,Dynamic) | |
Frequency | 2.4~2.483GHz |
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. | |
Transmission Power | 27dBm/500mw (Adjustable power by 1dBm) |
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
SOFTWARE FEATURES
Wireless Configurations | Pharos MAXtream TDMA Technology |
802.11b/g/n Modes | |
Selectable Channel Width: 5/10/20/40MHz | |
Automatic Channel Selection | |
Transmission Power Control | |
Dynamic Frequency Selection (DFS) | |
WDS Enable/Disable | |
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption | |
SSID Broadcast Enable/Disable | |
Multi-SSID with VLAN Tagging (AP mode only) | |
Distance/ACK Timeout Setting | |
Wireless MAC Address Filter | |
Wireless Advanced: | |
> Beacon Interval/RTS Threshold/Fragmentation | |
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia | |
Management | Discovery and Remote Management via Pharos Control application |
HTTP/HTTPS Web-based management | |
System Log | |
SNMP Agent(v2c) | |
Ping Watch Dog | |
Dynamic DDNS | |
SSH Server | |
System Tools | Wireless Signal Quality Indicators: |
Signal Strength/Noise/Transmit CCQ/CPU/Memory | |
Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP | |
Spectrum Analyzer | |
Speed Test | |
Ping | |
Traceroute | |
System-level Optimizations | Optimized IGMP Snooping/Proxy for multicast applications |
Hardware watch dog |
POE ADAPTER FEATURES
Dimensions(W x D x H) | 110*57*33.5mm |
Interfaces | 1 AC Jack with Earth Ground |
1 10/100Mbps Shielded Ethernet Port (Power + Data) | |
1 10/100Mbps Shielded Ethernet Port (Data) | |
Button | Remote Reset Button |
Power Status LEDs | Green |
Input | 100-240VAC, 50/60Hz |
Input Voltage | 100VA~240VAC @ 50Hz~60Hz |
Input Current | 0.4A Max @ 100VAC |
Output | 24VDC, 0.6A Max |
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) | |
Output Voltage | 24VDC(+4,5pins; -7,8pins) |
Efficiency | >80% |
Certifications | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
OTHERS
Certification | CE, FCC, RoHS, IPX5 |
Package Contents | Outdoor Wireless CPE |
24V 0.6A Passive PoE Adapter | |
Pole Mounting Straps | |
AC Power Cord | |
Installation Guide | |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. |
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. | |
Environment | Operating Temperature: -40℃~70℃ (-40℉~158℉) |
Storage Temperature: -40℃~70℃ (-40℉~158℉) | |
Operating Humidity: 10%~90% non-condensing | |
Storage Humidity: 5%~95% non-condensing |